Skip to content
中国 - Chinese
Search

Ls/Lx

型号：Ls/Lx 系列
电压：135V - 400V
电流：5A - 133A
功率：3kVA - 18kVA
概述：单相和三相交流电源

  • 概述 +


    California Instruments Ls-Lx 系列
    高度 = 208
    Ls/Lx 系列是由广受欢迎的 California Instruments L 系列改进的全新产品，提供多种基本的交流电源功能。

    Ls 系列
    Ls 系列是经典的 California Instruments L 系列交流电源的改进版。它以低廉的价格提供多种基本的交流源功能。用户也可以添加诸如任意波形生成和谐波测量等可选的附加功能作。Ls 系列提供单相（-1）和三相（-3）配置共用户选择。单个机箱的功率水平范围为 3 kVA 至 6 kVA。多个机箱也可以组合使用，以供应高达 18 kVA的功率。Ls 系列完全由微处理器控制，并可通过简单的前面板键盘进行操作。位于背光字母数字 LCD 显示屏旁边的一对模拟控件让用户对输出电流或频率进行动态调整。对于更多操作，用户可以使用 LCD 显示器上所提供的一系列菜单调节。Lx 系列交流电源，能让测试设备以更低的成本执行更多项功能，满足当今市场的需求。Lx 系列产品将灵活的交流电源与高性能谐波功率分析仪相结合，能够处理各种复杂应用。用户再也无需使用多个系统。

    Lx 系列
    Lx 系列完全由微处理器控制，并可通过简单的前面板键盘进行操作。位于背光字母数字 LCD 显示屏旁边的一对模拟控件让用户对输出电流或频率进行动态调整。Lx 系列交流电源/分析仪提供高精度、高负载驱动电流、多相或单相模式，内置功率分析仪测量功能，因此适用于交流电源测试的许多应用领域。Lx 系列产品还具备其他功能，如线路任意波形生成和 DO160 或 MIL704 测试标准，使其成为航空电子设备或国防应用的理想选择。所有 Lx 系列交流电源均配有 IEEE-488（GPIB）和 RS232C 远程控制接口，并支持 SCPI 命令语言编程。

  • 主要参数 +


    California Instruments Ls-Lx 系列：规格
    Output Ls
    Maximum Power per phase 3000Ls: 1 phase 3000 VA, 3 phase 1000 VA;
    4500Ls: 1 phase 4500 VA, 3 phase 1500 VA;
    6000Ls: 1 phase 6000 VA, 3 phase: 2000 VA
    Power factor 0 to unity at full output VA
    Voltage Ranges
    Range VLow VHigh
    AC 0 - 135 V 0 - 270 V
    VA Programming Resolution 100 mV
    Load Regulation < 0.1 % FS
    Line Regulation < 0.02 % for 10 % line change
    See -HV and EHV options for alternative voltage range pairs.
    Programming Accuracy
    (25°C ±5°C)    		 Voltage (rms): ± (0.05% + 0.25) V from 5.0 V to FS; Frequency:
    ± 0.025%, 3 ø: <1° [45-100 Hz], <1° + 1°/kHz [>1kHz]
    Frequency Range 45 Hz - 1000 Hz (see -HF option for higher output frequencies)
    Programmable down to 17 Hz with lower V limit.
    Frequency Resolution 0.01 Hz at < 81.9 Hz,
    0.1 Hz at >82.0 to 819.1 Hz,
    1 Hz at > 819 Hz
    Max RMS Current at Low V range
    At Full Power
    Model 1 ø 3 ø
    3000Ls 44.4 A 14.8 A
    4500Ls 44.4 A 14.8 A
    6000Ls 44.4 A 14.8 A
    At Full Scale Voltage
    Model 1 ø 3 ø
    3000Ls 22.2 A 7.4 A
    4500Ls 33.3 A 11.1 A
    6000Ls 44.4 A 14.8 A
    Note: Constant power mode on 3000Ls and 4500Ls provides increased current at reduced voltage;
    Current Limit Programmable from 0 Amps to maximum current for selected range
    Peak Current 3000Ls: 6 X (lrms @ full scale voltage); 4500Ls: 4 X (lrms @ full scale voltage); 6000Ls: 3 X (lrms @ full scale voltage)
    Output Noise 100mV rms typ. (20 kHz to 1 MHz) - Standard
    250mV rms typ. (20 kHz to 1 MHz) - Option -HF
    Harmonic Distortion < 1% (at full scale voltage, full resistive load)
    Output Relay Push button controlled and bus controlled output relay
    Output Lx
    Maximum Power per phase

    3000Lx: 1 phase: 3000 VA, 3 phase: 1000 VA;
    4500Lx: 1 phase 4500 VA, 3 phase 1500 VA;
    6000Lx: 1 phase 5770 VA, 3 phase: 1923 VA
    Power factor 0 to unity at full output VA
    Voltage Ranges
    Range VLow VHigh
    AC 0 - 150 V 0 - 300 V
    VA Programming Resolution 100 mV
    Load Regulation < 0.1 % FS ALC On or Reg.
    Line Regulation < 0.02 % for 10 % line change
    See -HV and EHV options for alternative voltage range pairs.
    Programming Accuracy
    (25°C ±5°C)    		 Voltage (rms): ± (0.05% + 0.25) V from 5.0 V to FS, ALC On or Reg;
    Frequency: ± 0.025 %; Phase: ± 1° 45-100 Hz,
    ± (1° + 1°/kHz) 100 Hz-1kHz
    Frequency Range 45 Hz - 1000 Hz (see -HF option for higher output frequencies) (Derated voltage from 17 Hz - 45Hz)
    Frequency Resolution

    0.01 Hz at < 81.9 Hz,
    0.1 Hz at >82.0 to 819.1 Hz,
    1 Hz at > 819 Hz
    Max RMS Current at Low V range
    Phases V Range VLow VHigh
    All 3 ø 12.8 A 6.4 A
    models 1 ø 38.4 A 19.2 A
    At Full Scale Voltage
    Model VLow VHigh
    3000Lx 3 ø 6.6 A 3.3 A
    3000Lx 1 ø 20.0 A 10.0 A
    4500Lx 3 ø 10.0 A 5.0 A
    4500Lx 1 ø 30.0 A 15.0 A
    6000Lx 3 ø 12.8 A 6.4 A
    6000Lx 1 ø 38.4 A 19.2 A
    Note: Constant power mode on 3000Lx and 4500Lx provides increased current at reduced voltage; 6000Lx provides maximum power output.
    Current Limit Programmable from 0 Amps to maximum current for selected range
    Peak Current 3000Lx: 5.7 X (lrms @ full scale voltage); 4500Lx: 3.8 X (lrms @ full scale voltage); 6000Lx: 3 X (lrms @ full scale voltage)
    Output Noise 100mV rms typ.
    250mV rms typ. for -HF option
    Harmonic Distortion < 1% (at full scale voltage, full resistive load)
    Output Relay Push button controlled and bus controlled output relay
    Input Ls
    Voltage Models 3000Ls, 4500Ls, 9000Ls, 13500Ls: Standard: 208-230 ± 10% VAC, (L-L, 3 Phase); Option -400: 400 ± 10% VAC (L-L, 3 Phase) Includes CE Mark; Models 6000Ls, 12000Ls, 18000Ls: Standard 208-230 + 10% VAC (L-L, 3 Phase)

    Notes: 1. Input must be specified when ordering. 2. -400 option not availble on 6000Ls, 12000Ls, 18000Ls. 3. 3000Ls can be operated from 1 phase AC. 4. -480V option ± 5% VAC (L-L, 3 Phase) available on 3000Ls & 4500 Ls (3 phase output only)
    Line Current (rms per phase)
    Model 187 VLL 187 VLN (1 ø) 208 VLL 360 VLL
    3000Ls 19 A 32 A n/a 10 A
    4500Ls 31 A n/a n/a 16 A
    6000Ls n/a n/a 38 A n/a
    Inrush Current (Per phase) @ 180-254 V: 50 A peak
    @ 360-440 V: 83 A peak
    Line Frequency 47-440 Hz
    Efficiency 80% typical
    Power Factor 0.7 typical
    Hold-up Time At least 10 ms
    Input Lx
    Voltage ModeLx 3000Lx, 4500Lx, 9000Lx, 13500Lx: Standard: 208-230 ± 10% VAC, (L-L, 3 Phase); Option -400: 400 ± 10% VAC (L-L, 3 Phase) Includes CE Mark; ModeLx 6000Lx, 12000Lx, 18000Lx: Standard 208-230 + 10% VAC (L-L, 3 Phase)

    Notes: 1. Input must be specified when ordering. 2. -400 option not availble on 6000Lx, 12000Lx, 18000Lx. 3. 3000Lx can be operated from 1 phase AC.
    Line Current (rms per phase)
    Model 3000Lx 3000Lx (1Phase) 4500Lx 6000Lx (@ 280V)
    187 VLL 19 A 32 A 31 A 38 A
    360 VLL 10 A n/a 16 A n/a
    Inrush Current (Per phase) @ 180-254 V: 50 A peak
    @ 360-440 V: 83 A peak
    Line Frequency 47-440 Hz
    Efficiency 80% typical
    Power Factor 0.7 typical
    Hold-up Time At least 10 ms
    Ls Measurements - Standard (AC Measurements)
    Parameter Frequency Phase Voltage (AC rms) Current (AC rms)
    Range 45-1000Hz 45-100Hz
    100-1000Hz
    		 0-400V 0-50A
    Accuracy* (±)
    1 ø mode (-1)     		0.1% + 1 digit 0.5°
    2°    		 0.05% + 250 mV 0.1% + 150 mA
    Accuracy* (±)
    3 ø mode (-3)    		 0.1% + 1 digit 0.5°
    2°    		 0.05% + 250 mV 0.1% + 50 mA
    Resolution* 0.01 Hz /
    0.1 Hz /
    1 Hz    		 0.1° 10 mV 1 mA
    Parameter Real Power Apparent Power Power Factor
    Range 0-6kW 0-6kVA 0.00-1.00
    Accuracy* (±) 1 ø mode (-1) 0.15% + 9 W 0.15% + 9 VA 0.03
    Accuracy* (±) 3 ø mode (-3) 0.15% + 3 W 0.15% + 3 VA 0.01
    Resolution* 1 W 1 VA 0.01
    * Accuracy specifications are in % of reading and apply above 100 counts. For multi-chassis configurations, current, power range and accuracy specifications are multiplied by 3. Power factor accuracy applies for PF > 0.5 and VA > 50% of max. Frequency measurement specification valid for output > 30 Vrms.
    Lx Measurements - Standard (AC Measurements)
    Parameter Frequency Phase Voltage (AC rms) Current (AC rms)
    Range 45.00-81.91 Hz
    82.0-819.1 Hz
    > 819 Hz    		 0.0° - 359.9°
    		 0-400V 0-50A
    Accuracy* (±)
    1 ø mode (-1)     		0.1% + 1 digit 0.5° < 100 Hz
    2° > 100 Hz    		 0.05% + 0.25V 0.1% + 0.15A
    Accuracy* (±)
    3 ø mode (-3)    		 0.1% + 1 digit 0.5° < 100 Hz
    2° > 100 Hz    		 0.05% + 0.25V 0.1% + 0.05A
    Resolution* 0.01 Hz /
    0.1 Hz /
    1 Hz    		 0.1° / 1° 10 mV 1 mA
    Parameter Crest Factor Real Power Apparent Power Power Factor
    Range 1.00 - 10.0 0-6kW 0-6kVA 0.00-1.00
    Accuracy* (±)
    1 ø mode (-1)     		1.5% 0.15% + 9 W 0.15% + 9 VA 0.03
    Accuracy* (±)
    3 ø mode (-3)    		 1.5% 0.15% + 3 W 0.15% + 3 VA 0.01
    Resolution* 0.01 1 W 1 VA 0.01
    * Accuracy specifications are in % of reading + scale error and apply above 100 counts. For multi-chassis configurations, current, power range and accuracy specifications are times three. CF accuracy applies for Irms > 50 % of max. PF accuracy applies for PF > 0.5 and VA > 50% of max. Frequency measurement specification valid for output > 20 Vrms.
    Ls System
    Storage Setup: 16 complete instrument setups / Transient List: 100 transient steps per list (SCPI mode) or 16 transient registers (APE mode)
    Trigger Input/Output Input: Triggers measurements or transient steps - SMA connector: 10K pull-up / Output: SMA Connector: HCTTL output
    Lx System
    Storage Setup: 16 complete instrument setups / Transient List: 100 transient steps per list (SCPI mode)
    Trigger Input/Output Input: Triggers measurements or transient steps - SMA connector: 10K pull-up / Output: SMA Connector: HCTTL output
    Ls Protection
    Overload/Temp/Voltage Overload: Constant current or constant voltage mode; Over temperature: Automatic Shutdown; Over voltage: Automatic shutdown
    Lx Protection
    Overload/Temp/Voltage Overload: Constant current or constant voltage mode; Over temperature: Automatic Shutdown; Over voltage: Automatic shutdown
    Regulatory/RFI Suppresion IEC1010, EN50081-2, EN50082-2, CE (for 400V input only), EMC, and safety mark requirements / RIF Suppression: CISPR 11, Group1, Class A
    Ls Remote Control
    IEEE-488 Interface IEEE-488 (GPIB) talker listener. Subset: AH1, DC1, DT1, L3, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax
    USB Interface & Ethernet (option) Version: USB 1.1; Speed: 460 Kb/s maximum / Ethernet Interface (Optional): specify -LAN option. 10BaseT, 100BaseT, RJ45
    RS232C Interface Bi-directional serial interface; 9-pin D-shell connector. Handshake: CTS, RTS. Databits: 7 w/ parity, 8 w/o parity. Stopbits: 2. Baud rate: 9600 to 115200. Supplied with RS232C cable / Code and Format: SCPI; APE and Able : option -GPIB
    Lx Remote Control
    IEEE-488 Interface IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax
    USB Interface & Ethernet (option) IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax
    RS232C Interface Bi-directional serial interface; 9-pin D-shell connector. Handshake: CTS, RTS. Databits: 7 w/ parity, 8 w/o parity. Stopbits: 2. Baud rate: 9600 to 115200. Supplied with RS232C cable / Code and Format: SCPI / Not enabled if LAN option is present.
    Ls Physical Dimensions
    Dimensions (per chassis) Height: 10.5” (267 mm), Width: 19” (483 mm), Depth: 23.7” (602 mm) (depth includes rear panel connectors)
    Weight Chassis: Net: 193 lbs / 87.7 Kg, Shipping: 280 lbs / 127.3 Kg (for /2 or /3 model configuarations multiply by number of chassis).
    Vibration and Shock Designed to meet NSTA project 1A transportation levels
    Air Intake/Exhaust Forced air cooling, side air intake, rear exhaust
    Temperature Temperature: Operating: 0 to 35° C, full power / Storage: -40 to +85° C;
    Diagnostics Built-in self test available over bus (*TST)
    Rear Panel Connectors * Three phase AC input and output terminal block with safety cover. * IEEE-488 (GPIB) connector (Option -GPIB). * 9-pin D-Shell RS232C connector (RS232 DB9 to DB9 cable supplied). * Remote Inhibit (INH) and Discrete Fault Indicator (DFI). * Remote voltage sense terminal block. * Trigger In1 and Trigger Out1. * System interface connectors. * Auxilary Output (Option -AX)
    Lx Physical Dimensions
    Dimensions (per chassis) Height: 10.5” (267 mm), Width: 19” (483 mm), Depth: 23.7” (602 mm) (depth includes rear panel connectors)
    Weight Chassis: Net: 193 lbs / 87.7 Kg, Shipping: 280 lbs / 127.3 Kg (for /2 or /3 model configuarations multiply number of chassis)
    Vibration and Shock Designed to meet NSTA project 1A transportation leveLx
    Air Intake/Exhaust Forced air cooling, side air intake, rear exhaust
    Temperature Temperature: Operating: 0 to 35° C, full power / Storage: -40 to +85° C;
    Diagnostics Built-in self test available over bus (*TST)
    Rear Panel Connectors * Three phase AC input and output terminal block with safety cover. * IEEE-488 (GPIB) connector, USB connector, RJ45 connector (with -LAN Option). * 9-pin D-Shell RS232C connector (RS232 DB9 to DB9 cable supplied). * Remote Inhibit (INH) and Discrete Fault Indicator (DFI). * Remote
    voltage sense terminal block. * Trigger In1 and Trigger Out1. * System interface connectors. * Auxilary Output (Option -AX)
    Ls Option -ADV Specifications
    Measurements
    Parameter Frequency Fundamental
    Harmonics    		 Voltage Current
    Range 45-81.91 Hz / 45.00 Hz-16 kHZ 0 - 400 V 0 - 20 Amps
    Accuracy* (±) 0.1% ± 1 digit / 0.1% + 2 digit 0.05% + 0.25V / 0.1% + 0.1%/kHZ + 0.25 0.1% + 0.05A / 0.1% + 0.1%/kHz +0.05A
    Resolution 01 Hz / 0.1 Hz. .01 V / .01V .01 A / .01 A
    * Accuracy specifications are in a percent of reading for single unit in 3-phase mode.
    Waveforms Pre-defined: Sine, Square, Clipped, User-defined, 1024 addressable data points; Storage: 50 user waveforms, non-volatile memory
    Data Acquisition Parameters: Voltage, Current time domain, per phase; Resolution: 4096 data points, 10.4 usec (1ø) or 31.25 usec (3ø) sampling interval
    Lx Ls -ADV Specifications
    Measurements
    Parameter Frequency Fundamental
    Harmonics    		 Voltage Current
    Range 45-1000 Hz / 45 - 16 kHz Harmonics 2 - 50 Harmonics 2 - 50
    Accuracy* (±) 0.1% + 1 digit / 0.1% + 2 digits 0.1% + 0.1% /1 kHz +0.25V 0.1% + 0.1% /1 kHz +0.05A
    Resolution 0.01 Hz / 0.1 Hz 10 mV 10 mA
    * Accuracy specifications are in a percent of reading for single unit in 3-phase mode.
    Waveforms Pre defined: Sine, Square, Clipped; User defined: 1024 addressable data points; Storage: 50 user waveforms, non-volatile memory
    Data Acquisition Parameters: Voltage & Current time domain, per phase; Resolution: 4096 data points, 10.4 usec (1ø) or 31.25 usec (3ø) sampling interval
    Ls Option -AX Specifications
    Option -AX Provides seperate isolated 26 VAC regulated and 5 Vac unregulated outputs. The 26 V is normally used for servo-synchro excitation, and the 5 V for lamp power. 26 Volt-Accuracy: ± 2%. Current capacity: 3 ARMS. Frequency: 360/440 Hz. Regulation ± 1.5%. 5 Volt-Accuracy: ± 5%. Current capacity: 1 ARMS
    Lx Option -AX Specifications
    Option -AX Provides seperate isolated 26 VAC regulated and 5 Vac unregulated outputs. The 26 V is normally used for servo-synchro excitation, and the 5 V for lamp power. 26 Volt-Accuracy: ± 2%. Current capacity: 3 ARMS. Frequency: 360/440 Hz. Regulation ± 0.05%. 5 Volt-Accuracy: ± 5%. Current capacity: 5 ARMS
    Ls Standard -EHV Specifications
    Voltage / Frequency Ranges Voltage: Low: 0-200 Volt; High: 0-400 Volt / Frequency: With -HF option: 45 Hz - 5000 Hz
    Max RMS Current at Full Power 3 Phase: High: 5.0 A, Low 10.0 A; 1 Phase: High: 15.0A, Low: 30.0 A; Note: Constant power modes on 3000Ls and 4500Ls. Current available at reduced voltage for 3000Ls, 4500Ls, and max voltage for 6000Ls
    Max RMS Current at FSVoltage 3000Ls: 3 Phase: High: 2.5 A, Low: 5.0 A; 1 Phase: High 7.5 A, Low: 15.0 A; 4500Ls: 3 Phase: High: 3.8, Low 7.5; 1 Phase: High: 11.3 A, Low: 22.5 A; 6000Ls: 3 Phase: High: 5.0 A, Low 10.0 A; 1 Phase: High: 15.0 A, Low: 30.0 A
    Lx Standard -EHV Specifications
    Voltage / Frequency Ranges Low Range: 0-135 Volt; High Range: 0-270 Volt RMS: With -HF option: 45 Hz - 5000 Hz
    Max RMS Current at Full Power 3 Phase: High: 7.4 A, Low 14.8 A; 1 Phase: High: 22.2 A, Low: 44.4 A; Note: Constant power modes on 3000Lx and 4500Lx. Current available at reduced voltage for 3000Lx, 4500Lx, and max voltage for 6000Lx
    Max RMS Current at FSVoltage 3000Lx: 3 Phase: High: 3.7 A, Low: 7.4 A; 1 Phase: High 11.1 A, Low: 22.2 A; 4500Lx: 3 Phase: High: 5.6, Low 11.1; 1 Phase: High: 16.7 A, Low: 33.3 A; 6000Lx: 3 Phase: High: 7.4 A, Low 14.8 A; 1 Phase: High: 22.2 A, Low: 44.4 A
    Ls Option -HV Specifications
    Measurements: F < 2000 Hz: See standard Ls Specifications; F > 2000 Hz: See table >
    Parameter Frequency Phase Voltage (AC rms) Current (AC rms)
    Range   <2000 Hz
    >2000 Hz    		 0-400 V< 1000 Hz / > 1000 Hz 0-50 A
    Accuracy* (±)
    1 ø mode (-1)     		0.1% ± 1 digit 0.5°
    2°
    5°    		 0.05% + 250 mV 0.5% + 150 mA
    Accuracy* (±)
    3 ø mode (-3)    		 0.1% ± 1 digit 0.5°
    2°
    5°    		 0.1 % + 0.1%/kHz + 300MV 0.5% + 50 mA
    Resolution* 0.01 Hz /
    0.1 Hz /
    1 Hz    		 0.1° 10 mV 1 mA
    Parameter Real Power Apparent Power Power Factor
    Range 0-6 kW 0-6 kVA 0.00-1.00
    Accuracy* (±)
    1 ø mode (-1)     		0.5% + 9W 0.5% + 9 VA 0.03
    Accuracy* (±)
    3 ø mode (-3)    		 0.5% + 3W 0.5% + 3 VA 0.01
    Resolution* 1 W 1 VA 0.01
    * Accuracy specifications are in % of reading and apply above 100 counts. For multi-chassis configurations, current, power range and accuracy specifications are multiplied by 3. Power factor accuracy applies for PF > 0.5 and VA > 50% of max. Frequency measurement specification valid for output > 30 Vrms.
    Frequency Range 45 Hz- 5000 Hz
    Output Noise <250 mVrms typical (20 kHz to 1 MHz)
    Lx Option -HV Specifications
    Parameter Frequency Phase Voltage (AC rms) Current (AC rms)
    Range 45.00 - 5000 Hz 0.0°-359.9° 0-400 V
    < 1000 Hz / > 1000 Hz    		 0-50 A
    Accuracy* (±)
    1 ø mode (-1)     		0.1% + 1 digit 0.5° < 100Hz
    2° < 2Khz
    5° > 2Khz    		 0.05% +
    0.25V /
    0.1 % +
    0.1%/kHz +
    0.3V    		 0.5% + 0.15A
    Accuracy* (±)
    3 ø mode (-3)    		 0.1% + 1 digit 0.5° < 100Hz
    2° < 2Khz
    5° > 2Khz    		 0.05% +
    0.25V /
    0.1 % +
    0.1%/kHz +
    0.3V    		 0.5% + 0.05A
    Resolution* 0.01 Hz / 0.1 Hz / 1 Hz 0.1° 10 mV 1 mA
    Parameter Crest Factor Real Power Apparent Power Power Factor
    Range 1.00 - 10.0 0-6 kW 0-6kVA 0.00-1.00
    Accuracy* (±)
    1 ø mode (-1)     		1.5% 0.5% + 9 W 0.5% + 9 VA 0.03
    Accuracy* (±)
    3 ø mode (-3)    		 1.5% 0.5% + 3 W 0.5% + 3 VA 0.01
    Resolution* 0.01 1 W 1 VA 0.01
    * Accuracy specifications are in % of reading and apply above 100 counts. For multi-chassis configurations, current, power range and accuracy specifications are times three. CF accuracy applies for Irms > 50 % of max. Power factor accuracy applies for PF > 0.5 and VA > 50% of max. Frequency measurement specification valid for output > 20 Vrms.
    Frequency Range 45 Hz- 5000 Hz (Derated voltage from 17 Hz - 45Hz)
    Frequency Accuracy ±0.025%
    Output Noise 250 mVrms typical (20 kHz to 1 MHz)

  • 数据手册 +

  • 技术手册 +

  • 硬件更新 +

  • 相关软件 +

  • 仪器驱动 +

  • USB驱动 +

  • 获取报价 +


    附带
    光盘上的用户/编程手册、软件和 RS232C 串行电缆。
    输出选件
    -AX¹ 辅助输出，26 VAC，5 VAC。将上限频率限制为 800 Hz。
    -HV¹ 156/312 V 输出范围。
    -EHV¹ 200/400 V 输出范围。
    -HF¹ 扩展频率上限。见 HF 表。
    -LF¹ 将输出频率限制为 500 Hz。
    -FC 将输出频率控制更改为 ±0.25％
    控制器选件
    选件代码 描述
    -ADV 高级功能集。增加了任意波形生成和电压、电流的谐波分析。
    -EXS 外部同步。
    -GPIB GPIB 接口和 APE 编程语言。
    -LAN 以太网接口。
    -MB 多箱。将控制器添加到多机箱系统的辅助机箱。
    -MODE 为 3 个型号添加相位模式选择。

    -L22

    		 锁定旋钮
    -LKM¹ 时钟和锁定主设备
    -LKS¹,² 时钟和锁定辅助设备
    -LNS² 线路同步
    -EXS² 外部同步。
    LS 航空电子设备测试常规选件
    选件代码 描述
    -ABD 空客指令 0100.1.8 测试。[仅限 AC]。需要 -ADV 和使用 Windows PC 及附带的 FCS 系列 II 仪器控制软件。
    -AMD 空客 AMD24C 测试。C 版。
    -A350 空客测试软件
    -AIRB 空客 ABD0100.1.8、AMD 24 和 A350 组合测试软件套件
    -704 军用标准 704 版 D 和 E 测试固件。[仅限 AC，详情请参阅 -704 选件数据表]
    -704F 军用标准 704 测试固件。A-F 版。
    -160 RTCA/DO-160D、Change 2、EuroCAE-14D 和空客测试固件 [第 16 节，仅限 AC。详情请参阅 -160 选件数据表]
    *注意 有关性能功能的完整列表，请参阅航空电子设备测试用户手册 P/N 4994-971。
    LX 航空电子设备测试常规选件
    选件代码 描述
    -ABD 空客指令 0100.1.8 测试。[仅限 AC]。需要 -ADV 和使用 Windows PC 及附带的 FCS 系列 II 仪器控制软件。
    -AMD 空客 AMD24C 测试。C 版。
    -A350 空客测试软件
    -AIRB 空客 ABD0100.1.8、AMD 24 和 A350 组合测试软件套件
    -B787 波音 787 测试软件
    -704 军用标准 704 版 D 和 E 测试固件。[仅限 AC，详情请参阅 -704 选件数据表]
    -704F 军用标准 704 测试固件。A-F 版。
    -160 RTCA/DO-160D、Change 2、EuroCAE-14D 和空客测试固件 [第 16 节，仅限 AC。详情请参阅 -160 选件数据表]
    *注意 有关性能功能的完整列表，请参阅航空电子设备测试用户手册 P/N 4994-971。
    机柜选件
    C 前缀 机柜系统。已在 19 英寸机柜中安装和预接线。
    标准 -EHV 规格
    HF LF HV EHV
    HF - X O O
    LF X - O O
    HV O O - X
    EHV O O X -
    LKM X O O O
    LKS X O O O
    EXS O O O O
    AX X O O O
    LKM LKS EXS AX
    HF X X O X
    LF O O O O
    HV O O O O
    EHV O O O O
    LKM - O O O
    LKS X - X O
    EXS O X - O
    AX O O O -